hybrid node type

How can I help my 192.168.2.1 router to connect to the Belkin?

And I question if the state can not connect, reset the Rutaton era in IVE, the IVE attempts to manually change Bothering your own IP address ... is ipconfig Windows IP Configuration Host Name. . . . . . . . . . . . : Bean primary DNS suffix. . . . . . . : Node Type. . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DHCP is enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled. . . . : Yes IPv4 Address. . . . . . . . . . . : 82.2.179.206 (Preferred) Subnet Mask. . . . . . . . . . . : 255.255.252.0 Default Gateway. . . . . . . . . : 82.2.176.1 DHCP Server. . . . . . . . . . . : 62.255.64.14 DNS server. . . . . . . . . . . : 194.168.4.100 194.168.8.100 please. It helps me connect to ... ps is not a good help and I didn't Im Berukinindian computer or network, please talk will proceed IVE simple ... thanks ..

Addressing that issue. Your ISP 82.2.179.206 / 22 as the address of your local machine to allocate. You can use the subnet mask to 1022 unique host addresses, one need only one thing one please. Worse Still 16384 subnets, each subnet is 1022 different hosts. They are the end user, even if, in fact, block the subnet issues such would not have owned this big. Addition, DHCP server Also, very similar to the address space, and one of the cases are unlikely to be listed. Finally, ISP's own DNS server and most of the one described here is not the same address space It is, ISP's DNS server either, 82.2 179.x indicating that no right is assumed. Anyway bottom line is that obviously all messed up. Your ISP should be determined by contacting Cases, DHCP handing out the address first. In that case (do not), and most correct address information please contact us. They are your network, gateway, and DNS, not give your real address It is allocated dynamically. After it, to reset the router to factory defaults, PUBLIC into the DHCP on an interface configured to receive information that will be needed. Then set The internal private network 192.168.2.x and the private interface to get a DHCP / 29 (192.168.2.1 255.255.255.248). This along with the subnet mask is provided to internal network 5 to work on the internal private network using a single address. You 192.168.2.1 / 29 is assigned to the internal interface of the router. Router 192.168.2.6 192.168.2.2 / 29 to give the Sun / 29. This is the average home network is generally sufficient, the machine, at any point to your network by restricting the total number of cannect can add a bit of security. The location As the gateway on the internal interface, the packet is to know the root of the local network. Then, DHCP in your PC to receive may I go to set up.